Quantum CHS Switchover

khalid_inayat

Member
K
Join Date
May 2006
Location
Jeddah
Posts
20
hi everybody,
I have CPU quantum with CHS (hot standby configuration) I want to know what is the right procedure to perform switchover from primary to standby through software control(command register).i also have to make logic in primary PLC and to copy the same in standby..what should be keep in mind as the system is running without any problem using ProWorx nxt

Regards
Khalid
 

Similar Topics

H
What software to open quantum 434 12A backup
hi All Can you please help me to find the right software to open Zip backup of 434 12A PLC? Any major steps I need to know when opening? Regards
Replies
5
Views
90
hewking
H
V
Modicon Quantum PLC instruction questions
Hello All, Was hoping I could get a little help with Modicon ladder logic. This is the first time I have seen Modicon logic and currently trying...
Replies
6
Views
312
Lare
L
K
Modicon quantum
Hi There, I have a Modicon Quantum PLC, there is a alarm on display "noConfig" its happened after power failure, I have gone through manuals...
Replies
3
Views
669
dalporto
dalporto
K
TSX Quantum "Dim Awareness"
Hey guys. Mostly new to this stuff so I apologize if I'm not following proper format. I have 3 working CPU133 /3s. There is a desktop with a...
Replies
2
Views
913
Kharozan
K
M
In modicon quantum cpu card 140cpu43412A
When i read the specification of 140CPU43412A i observe that as remembered in specification 1. Local i/o : Maximum i/p and o/p words are 64 in...
Replies
0
Views
506
Mohammed zaid
M
Back
Top Bottom