Quantum NOE77101 firmware upgrade question

zankorel

Member
Join Date
Dec 2008
Location
Hunter Valley
Posts
173
Hi guys,

I have a quick question that I have not been able to find the answers to so far from my online searches.
I need to upgrade my Quantum NOE771-01 ethernet module to a newer firmware version than it is (currently 1.5 according to OS loader).

My question is, can I upgrade a NOE firmware major revision that is higher than the corresponding Unity version? ie I want to put 4.3 firmware on the NOE, but am running Unity 3.1.

Im pretty sure I can get away with upgrading to 3.6, but it seems a waste to not go all the way to the current while I am doing it if I can.
 
Well, unfortunately I couldnt even get the firmware upgraded to version 2 as i got a mismatch error on the earliest firmware upgrade available on the schneider website.

Has anyone ever managed to upgrade the NOE771-01 firmware past v1.4 using Unity?
 

Similar Topics

Hi All, I am very new to Schneider Electric systems. I am up-grading a stand alone quantum PLC 140CPU65160 system to a hot standby 140CPU67160...
Replies
0
Views
1,507
Need help, i am trying to install a noe77101 with concept 2.5, but only noe77100 and noe77110 show up in io map. Any help would be appreciated.
Replies
0
Views
1,767
hi All Can you please help me to find the right software to open Zip backup of 434 12A PLC? Any major steps I need to know when opening? Regards
Replies
5
Views
89
Hello All, Was hoping I could get a little help with Modicon ladder logic. This is the first time I have seen Modicon logic and currently trying...
Replies
6
Views
306
Hi There, I have a Modicon Quantum PLC, there is a alarm on display "noConfig" its happened after power failure, I have gone through manuals...
Replies
3
Views
667
Back
Top Bottom