ganutenator
Lifetime Supporting Member
I apologize for not having the model of the plc. I am trying to get it.
I have a print out of the program and it seems straight fwd.
One instruction however has an encoder input.
The instruction is [SPD X000 K100 DO]
parallel branch output [MUL DO K10 D4]
And it has a normally open contact w/ address M8000
I didn't see M8000 anywhere else in the program, so I wonder if it is an interrupt or some other special instruction address.
Any help will be appreciated.
Thanks in advance.
I have a print out of the program and it seems straight fwd.
One instruction however has an encoder input.
The instruction is [SPD X000 K100 DO]
parallel branch output [MUL DO K10 D4]
And it has a normally open contact w/ address M8000
I didn't see M8000 anywhere else in the program, so I wonder if it is an interrupt or some other special instruction address.
Any help will be appreciated.
Thanks in advance.