Boxbiz
Member
I have a cardboard baler that uses the Red Lion CL05 interface to control bale size, wire twists and a couple other things. It is showing invalid data on the bale count and giving improper counts to the PLC causing short bales now. The baler mfg says its all obsolete and the only thing they can do is a 12k upgrade. It looks like from what I have read that I can get another used CL05 or new old stock and download the data base from the CL05 and enter it into another unit using edict97 but have to get xp to run it. The PLC is a allen bradley micrologix 1200. Anyone have any suggestions options other than this? anyone able to do the program transfer if I cannot find someone local?
Thanks for any help on this.
Thanks for any help on this.