John McCoy
Member
Howdy,
We have control valves for temp control that need to maintain t- 2 degrees the valves are on/off. The set point and real time temp in G15 HMI but will not process to turn on or off. Red lion seems to have no answer. This is Crimson 3 software
Thanks
John
We have control valves for temp control that need to maintain t- 2 degrees the valves are on/off. The set point and real time temp in G15 HMI but will not process to turn on or off. Red lion seems to have no answer. This is Crimson 3 software
Thanks
John