Red Lion G303 timeout error

Stu Smith

Member
S
Join Date
Jul 2017
Location
Melbourne
Posts
2
Hi All,

I have a problem with a Red Lion G303 screen, paired to a Micrologix 1000.
I am getting a timeout error message.
When I have a search to find out what this means, the software error messages sheet points towards a cable problem or that the Port is configured with a communications driver.
The installation was previously tested and this error has occurred on Site.
Any feedback would be appreciated
 

Similar Topics

tommy23t
Red Lion G303 and Lenze Modbus
Hi all. Can anyone help me on Modbus addressing/ assigning? :nerves: Basically, I have a G303 display using TCP/IP talking to a pair of Lenze /...
Replies
9
Views
5,561
DanYost
DanYost
S
HELP! Red Lion G303 w/ Quicksilver QCI-D2
HELP ME PLEASE! I am attempting to program a Red Lion G303 to run a Quicksilver QCI-D2 motor controller. This is the first time using the G303...
Replies
2
Views
1,825
DanYost
DanYost
A
Trying to get copy of Red Lion G315 HMI program but support upload was not ticked.
Hi All, As a precaution my company has been collecting copies all the HMI and PLC programs. I have recorded copies of most of our sites...
Replies
0
Views
91
Angus_Fergusson
A
BobB
What has the Red Lion hiccup cost you?
While they came up quickly with a fix for the alarm date issue quickly I will have to drive around for a week or so, burning up a lot of fuel...
Replies
4
Views
299
padees
P
A
PSA: Red Lion datalog, alarm and event date/time errors
From the Red Lion website, after some customer enquiries in the last week or so... Rev. March 25, 2024 [18:30] Just thought it might help a...
Replies
9
Views
310
DwSoFt
D
Back
Top Bottom