ForcedTQ
Member
Just getting into learning the Crimson 3.0 database software and I need some help. I am trying to figure out the reason why the G306A will not communicate with the Well Troll 500 unit over the RS485 modbus connection. I have tried all of the available wiring combinations for 2-wire RS485, flipping TX-A and TX-B, and have not had any luck.
If anyone could take a look at the database file attached and lead me in the right direction I would greatly appreciate it. We are using the G306A as a web server and data-log archiving unit essentially so that we can view the Well Troll data remotely, and send that data to an archive folder on our BAS.
You will need to change the file extension to .cd3 to be able to open it in Crimson 3.0
Thanks, Chris
If anyone could take a look at the database file attached and lead me in the right direction I would greatly appreciate it. We are using the G306A as a web server and data-log archiving unit essentially so that we can view the Well Troll data remotely, and send that data to an archive folder on our BAS.
You will need to change the file extension to .cd3 to be able to open it in Crimson 3.0
Thanks, Chris