mjoubert
Member
Hi,
Anyone using a Redlion to communicate to a Beckhoff PLC? CX9020 or similar.
Set up comms and all was working for about a month then comms between the 2 devices fails. I can comm directly to both devices from the hub, but they don't see each other, which is strange.
After setting the boot up time under the Redlion ADS settings to 12 sec the problem seemed to be gone..... But alas, a few days later, my woes continue.
I have tried various timeout settings with no luck.
Has anyone else encountered this problem?
Anyone using a Redlion to communicate to a Beckhoff PLC? CX9020 or similar.
Set up comms and all was working for about a month then comms between the 2 devices fails. I can comm directly to both devices from the hub, but they don't see each other, which is strange.
After setting the boot up time under the Redlion ADS settings to 12 sec the problem seemed to be gone..... But alas, a few days later, my woes continue.
I have tried various timeout settings with no luck.
Has anyone else encountered this problem?