Remote camera saving images to SQL

Matthias von Zorn

Member
Matthias von Zorn
Join Date
Jan 2003
Location
Michigan
Posts
490
Hey all. A customer has asked me if their wonderware & SLC 5/05 bases system can auto capture images when triggered and save the images to an SQL or access database with the image name or a field based on a datafield in the PLC or wonderware. Anyone have any ideas on this? Ive seen it should be pretty straight forward to get a camera which can be remote triggered, but what about labeling it and saving it to the database. This part seems to be the question. Thanks

Matthias
 

Similar Topics

Z
SCADA Pack RTU 474, IO card (5606) Not responding in Remote Connect
Hi, We have been facing a issue with SCADAPack 474. Configuration is like below. RTU 474 + 6103 PS + 5606 IO Mix Module + 5414 DI Module Only...
Replies
0
Views
69
Zubairjaved786
Z
B
Recommendation for Expandible remote IO with OPC UA
Hello, Can anyone recommend an expandible IO module with OPC UA? I've deployed the Emerson RSTIO-OM module and it works great, but it has a...
Replies
0
Views
53
BeepBob
B
M
SCADA network extension to remote sites
So I'm pretty new around here but I come looking for advice or suggestions to research. Im the plant electrician/SCADA guy for a warer department...
Replies
8
Views
286
BeepBob
B
Cotafam
Addressing a Remote I/O Bit
See the screenshot of EIP tag list. We are trying to read in a digital input that is hard-wired. It is shown here as I31.1. I believe we cannot...
Replies
7
Views
304
Cotafam
Cotafam
T
Problem with remote control Compactlogic 35e
Hello Dear users, I am writing about a problem that has been bothering me for a few days, i.e. I am trying to establish remote access to the Allen...
Replies
0
Views
105
TOREK513
T
Back
Top Bottom