Hi all,
PLC : Micrologix 1500 lrp
HMI : Renu FP3070 TN
I am a beginner in the plc world.
I am trying to connect the renu hmi with ML1500 lrp in channel 1 with RS 232 cable.
The software for Renu hmi is Flexisoft.
How can I establish the communication between the HMI and the plc so that I can energize input through it?
In the rslogix, I had configured channel 1 as 9600 baud rate and df1 full duplex.
In the HMI software, selected ML1500 and configured the same baud rate.
Could anyone please guide me on how to connect a different hmi with ML 1500?
cheers
PLC : Micrologix 1500 lrp
HMI : Renu FP3070 TN
I am a beginner in the plc world.
I am trying to connect the renu hmi with ML1500 lrp in channel 1 with RS 232 cable.
The software for Renu hmi is Flexisoft.
How can I establish the communication between the HMI and the plc so that I can energize input through it?
In the rslogix, I had configured channel 1 as 9600 baud rate and df1 full duplex.
In the HMI software, selected ML1500 and configured the same baud rate.
Could anyone please guide me on how to connect a different hmi with ML 1500?
cheers