Microbictomb
Member
So I have 3 racks with a 1785-L40/B processor. Channel 2A runs rack 3 with a 1771-ASB remote adapter in scanner mode. I received a 1785-LT as a spare and I wanted to test it out as a remote adapter and/or scanner module.
I have the switch settings correct according to the manuals. I am not getting a response from the LT in the channel status. The channel configuration set for scanner mode seemed to be the first/easiest option to test it out but I get no response and switching to adapter mode gives the same results.
Channel 2A status LED flickers green really fast while in scanner mode and is solid green in adapter mode on the L40, the REM I/O LED on the LT is solid red in scanner mode and green/red flashing in adapter mode.
This is a simple ladder for testing I/O but if anyone has a suggestion for this new connection I would greatly appreciate it.
Thanks,
Jon
I have the switch settings correct according to the manuals. I am not getting a response from the LT in the channel status. The channel configuration set for scanner mode seemed to be the first/easiest option to test it out but I get no response and switching to adapter mode gives the same results.
Channel 2A status LED flickers green really fast while in scanner mode and is solid green in adapter mode on the L40, the REM I/O LED on the LT is solid red in scanner mode and green/red flashing in adapter mode.
This is a simple ladder for testing I/O but if anyone has a suggestion for this new connection I would greatly appreciate it.
Thanks,
Jon