Rievteh PLC to HMI communication via Ethernet

auto123

Member
A
Join Date
Jun 2020
Location
port louis
Posts
4
Hello Everyone!

I am new to PLC systems.

I'm trying to connect a Rievtech PLC to a Rievtech HMI directly through Ethernet communication. After setting IP addresses on both sides, I am having 'Communication Timeout' message on the HMI.

PLC: Rievtech PR-26DC-DAI-RA-N
HMI: Rievtech RTS6070WE

IP Addresses:
HMI- 192.168.100.20
PLC- 192.168.100.10
Subnet - 255.255.255.0 on both side

Anyone familiar with this PLC brand can guide me through this please. Thank you.
 

Similar Topics

S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
9
Views
206
mburtis
M
N
Conveyor PLC
the conveyor can stop because of a safety sensor or safety switch. And also it can stop because of an object jam detector sensor. If the conveyor...
Replies
5
Views
188
geniusintraining
geniusintraining
T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
42
Tecnolaundry
T
Mas01
S7-TIA Portal: How can I make a project if I've only got the code loaded on the PLC?
Hi All, Someone at work has put a PLC system on my desk, that's just been taken off an idle production line. He said "It's an S7 PLC. We don't...
Replies
10
Views
252
bkottaras
B
A
ATS using a PLC
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...
Replies
0
Views
64
Alibaba07
A
Back
Top Bottom