rta53
Lifetime Supporting Member
I am installing a DSPLE000 to be used with an Allen-Bradley ML1500. I am connecting the DSP to the ML1500 using a CBLGEN01 and an Allen-Bradley 1761-CBL-PM02 cable. I am using the RS232 port on the DSP. I also have a G3 that I am connecting to an ethernet switch and DSP is also connected to the switch. I tried this configuration and I don’t think the DSP is communicating with the Micrologix through the RS232. I thought I could use the DSP as a replacement to the NET-ENI. At least that was the impression I was given by a Red Lion rep. I already have my tags in the G3 mapped to the ML1500 based on the IP address assigned in the NET-ENI. Guess I'm just not understanding how the DSP is supposed to work.