MorphuisOGrady
Member
Has anyone here ever used plant pax?
I have some questions in relation to the motor block I hope someone can help me with.
I have some questions in relation to the motor block I hope someone can help me with.
It is hard to find off-the-shelf programmed devices that can do custom functions. If you knew exactly what was inside the Rockwell Plant Pax devices, then you could probably find a work-around that would do the job. I bet they won't tell you enough details to allow complete customizing.1. OFF STA= 0 , STO =0 Pump cannot not run
2. TEST STA =1, STO =0 This position is momentary and must be held on by operator. When in this position run pump for max of 30 secs
3. REMOTE: STA =0, STO =1, Hand control back to PLC
4. REMOTE START STA =1, STO =1. Hand control back to PLC in Auto.
It is hard to find off-the-shelf programmed devices that can do custom functions. If you knew exactly what was inside the Rockwell Plant Pax devices, then you could probably find a work-around that would do the job. I bet they won't tell you enough details to allow complete customizing.
1. OFF STA= 0 , STO =0 Pump cannot not run
2. TEST STA =1, STO =0 This position is momentary and must be held on by operator. When in this position run pump for max of 30 secs
3. REMOTE: STA =0, STO =1, Hand control back to PLC
4. REMOTE START STA =1, STO =1. Hand control back to PLC in Auto.
Hi
Are does Places automation houses or are that factories.
Do you find them hard on memory. One thing new to me was having to download a 40 page(around that size) PDF for a digital input to see how it was use in the code. The interlock aoi is one I would use again put I feel I have a nicer motor one , but sure I would think that I wrote it.
Are u doing some work n our green wet cold broke country
Donnchadh