jw5192
Member
Hi
I'm using an AB1400 and a PVP1000 wanting to establish RPM, I've setup the fuction file on the HSC:0/ACC,and the IO configuration to BWA 12.5us
Using a encoder 250ppr i can physically see the pulses in the function file and on my LIM in my ladder,
i would like to send these counts to a counter controlled by a timer turning on the rung.
MY question is what instruction to use to get the counts from the HSC:0/ACC to a counter on my ladder.
I'm using an AB1400 and a PVP1000 wanting to establish RPM, I've setup the fuction file on the HSC:0/ACC,and the IO configuration to BWA 12.5us
Using a encoder 250ppr i can physically see the pulses in the function file and on my LIM in my ladder,
i would like to send these counts to a counter controlled by a timer turning on the rung.
MY question is what instruction to use to get the counts from the HSC:0/ACC to a counter on my ladder.