RS232 pin configuration details.

ravi81elect

Member
R
Join Date
May 2011
Location
Dllhi
Posts
6
Hello,
I have Modicon quantum PLC and HMI GXO3502. I am using modbus component driver for communication but some how HMI is not communicationg with PLC. Do anyone have RS232 pin configuration details for communication between HMIGXO3502 and Quantum PLC?
 
I'm not sure if this is what you're looking for but this seems to be a generic GXO pin out for the DB9 RS232 connector.

db9gxo.PNG
 

Similar Topics

P
RS232 and RS-485 pin configuration for 1756-nc01 to ML1400 8-pin mini Din connector
Hiii, I want to communicate MGate MB3180 to my ML1400 channel0 configuration as my ML1400 as Modbus RTU master. But i need pin configuration for...
Replies
4
Views
1,747
Mickey
Mickey
A
3-pin RS232 to RS485
Hello: I have to connect a RS232 Modbus RTU slave that only has Tx, Rx and GND signals to a Modbus RTU master. However, all RS232 to RS485...
Replies
3
Views
250
AlfredoQuintero
A
J
MELSEC A RS422 (25pin) <> iQR C24 Serial RS232 (9pin) - Simple PLC Communication
MELSEC A RS422 (25pin) <> iQR C24 Serial RS232 (9pin) - Simple PLC Communication Communication from a MELSEC-A Series CPU (RS-422 – DB 25 Pin)...
Replies
4
Views
1,054
jenas6423
J
H
RS232 to 6 Pin Mini DIN.
Im having to re purpose some old PlantLinc 580 wireless IO extender boxes. Im having a little trouble trying to find a cable for them. The...
Replies
6
Views
2,105
geniusintraining
geniusintraining
A
MIL 1553B to RS485/RS232 connectors/converters
i have an device which can support serial (RS485,RS232),CAN protocol . i want to connect it to an existing MIB 1553B bus ,what device will I need...
Replies
0
Views
105
AP000001
A
Back
Top Bottom