dgrockwell
Member
I am trying to send a command string via the serial port of a Logix5555 processor to an Omron RFID controller.
Using a SLC 500 I can send this command string: ARA1000A1E*^M ,and get the desired response.
Using RSLogix5000 with the port and user protocol configured exactly the same, I get a response from RFID controller of "wrong command format".
Does the 5000 send a string differently than the 500?
Thanks,
Frustrated
Using a SLC 500 I can send this command string: ARA1000A1E*^M ,and get the desired response.
Using RSLogix5000 with the port and user protocol configured exactly the same, I get a response from RFID controller of "wrong command format".
Does the 5000 send a string differently than the 500?
Thanks,
Frustrated