rsLogix500 access

madclickr

Member
Join Date
Jun 2007
Location
Tennessee
Posts
5
I have a employee leave when he was the only one that had access the plc through the pc to devicenet highway control box. I have tried to access the plc and I can't seem to get in to it. I bring up the RSLogix500 software then pulled up the communication tab. The window shows the workstation online but the plc's don't show to be online. What should I do to access the plc's?
 
More info needed. What SLC or Micrologix do you have? Complete catalog number if possible. The more info you give us the better the help.
 
Okay, now tell us how you are physically connected to it, and how you have RSLinx set up.

The 5/03 has a serial port (DF1 protocol) and a DH485 port by default.

You mentioned a "devicenet highway control box", could that be a Data Highway 485 box? (1747-AIC) Find the part number from the "box" and we should be able to help you figure it out.

Paul
 

Similar Topics

So basically i have 2 queries : 1. I have a program file of S7-300 PLC which i want to migrate in RSLogix500.In short i want to convert my simatic...
Replies
15
Views
300
So here's my situation, I have been tasked with modifying the logic to mimic a button press in the PLC. I have two identical machines however one...
Replies
6
Views
558
Hello, I'm new to programming. I'm using RSLogix500 to modify an existing program for a SLC500. My plan was to use one of the existing inputs...
Replies
26
Views
2,038
So i have an allen bradley rack (2080-LC50-24QWB), i have it connected through ethernet. I dont have an offline program so im trying to upload...
Replies
6
Views
711
Hi Everyone, I am supporting a system which runs on a SLC 500 (1747-L532). A fault has developed whereby the output state of some digital outputs...
Replies
10
Views
1,029
Back
Top Bottom