Hi all, I am using RSLogix5000 version 7 to modify a program on a 1756-L1 controller. We have installed 5 more drives on a conveyor system. The existing program is using an array to control the cascade start. M[77].0 - M[77].15. M[77.0] being the last conveyor and therefore being the first to start. The Array 0 is being copied to M[77] Length 2.
The 5 drives we have installed are right on the end i.e. last. So i would like to make the last new drive M[77].0 and the existing M[77].0 is to become M[77].5.
How do I increase the size of the Array and what would the COP command become?
I have sorted all the control side but just cant get my head around this bit!!
Many Thanks in advance for any help given.
Kev
The 5 drives we have installed are right on the end i.e. last. So i would like to make the last new drive M[77].0 and the existing M[77].0 is to become M[77].5.
How do I increase the size of the Array and what would the COP command become?
I have sorted all the control side but just cant get my head around this bit!!
Many Thanks in advance for any help given.
Kev