Mark Snodgrass
Member
I asked this in another thread, but I am going to start a new thread to see if anyone has more info on this problem.
I am having an issue with my install of RSLogix5000 V20.01 not working. I current use V19.01 and V20.01 in my mill. I have had no issues at all out of V19.01, but V20.01 will work for awhile and then start having fatal errors upon opening an existing file or creating a new file. I ca reinstall v20.01 and it will start working again until it starts crashing again after a few uses. Luckily the two PLCs that use V20.01 I don't have to get on very often, but it does get to be an annoyance.
I am using Windows 7 Professional (64-bit).
Does anyone know if upgrading to 20.04 would fix this issue or if there may be some other problem I need to address.
I am having an issue with my install of RSLogix5000 V20.01 not working. I current use V19.01 and V20.01 in my mill. I have had no issues at all out of V19.01, but V20.01 will work for awhile and then start having fatal errors upon opening an existing file or creating a new file. I ca reinstall v20.01 and it will start working again until it starts crashing again after a few uses. Luckily the two PLCs that use V20.01 I don't have to get on very often, but it does get to be an annoyance.
I am using Windows 7 Professional (64-bit).
Does anyone know if upgrading to 20.04 would fix this issue or if there may be some other problem I need to address.