brettdawnj
Member
I have a RSview Studio application that I wrote a while back. Recently the panelview plus died at my customer, and I had to change the logix board and Compact Flash as it was corrupt. When I did the install of the new parts, the company also asked me to change the IP addresses of the Compactlogix PLC and the Panelview Plus as their network structures changed. Now when I call up RSview on my PC, when I start up the application, I get a red X and the following message:
"Device Shortcut 'compactlogicplc' is not usable: the device '1789-A17 Virtual Chassis.Terex_Andon_RT_Cranes' is not available, error=$80070057"
Does anyone know what this message really means? The application runs and doesn't have any errors that I can tell. I can also run the application in the "Test Application" mode and on my laptop, the test version of ME runs and it calls up the data fine. But, when I try to change or see tag information in my development mode, I can not call up the on line file as I used to. Before I could browse tags and choose which one I want to use. Now I must copy a tag text out of RSLogix and paste it in where I want it in RSView. These tags show up as functional and the data is correct for what is in the PLC.
For me it appears that somehow I have a setting or corruption in RSLinx Enterprise and it will not let me call up tags in an on-line mode. I may be off base on this, but everything else seems to work. I have even been able to call up online tags with AB's "Tag Upload Download Tool" with out any problem.
Does anyone have any suggestions as to how to make the online tags start working in my application?
Thanks,
Brett
"Device Shortcut 'compactlogicplc' is not usable: the device '1789-A17 Virtual Chassis.Terex_Andon_RT_Cranes' is not available, error=$80070057"
Does anyone know what this message really means? The application runs and doesn't have any errors that I can tell. I can also run the application in the "Test Application" mode and on my laptop, the test version of ME runs and it calls up the data fine. But, when I try to change or see tag information in my development mode, I can not call up the on line file as I used to. Before I could browse tags and choose which one I want to use. Now I must copy a tag text out of RSLogix and paste it in where I want it in RSView. These tags show up as functional and the data is correct for what is in the PLC.
For me it appears that somehow I have a setting or corruption in RSLinx Enterprise and it will not let me call up tags in an on-line mode. I may be off base on this, but everything else seems to work. I have even been able to call up online tags with AB's "Tag Upload Download Tool" with out any problem.
Does anyone have any suggestions as to how to make the online tags start working in my application?
Thanks,
Brett