swapnil.naik
Member
Hello Everybody,
I need a help on the above subject :-
Scenario: We need to upgrade a present system consisting on S5 PLC, OP15 HMI and IPP144-40 Printer to S71200 , KTP 600 and same printer.
Now after studying the software I was able to convert S5 program to S7, but the problem i am facing is that the printer ( a small panel mounted printer) which directly communicates with OP15, sends it print command received from PLC.( Certain PLC Job command)
Now that we won't be using OLD HMI COROS OP15 instead using KTP 600,I think it is only possible to send print command directly from PLC, do anybody have idea or worked on this type of printer and OP15 HMI.
OP 15 has old software Comtext which is not available and neither it supports WinXP forget Windows 7.
Anybody worked on OP15 and IPP144-40 printer pls help.
I need a help on the above subject :-
Scenario: We need to upgrade a present system consisting on S5 PLC, OP15 HMI and IPP144-40 Printer to S71200 , KTP 600 and same printer.
Now after studying the software I was able to convert S5 program to S7, but the problem i am facing is that the printer ( a small panel mounted printer) which directly communicates with OP15, sends it print command received from PLC.( Certain PLC Job command)
Now that we won't be using OLD HMI COROS OP15 instead using KTP 600,I think it is only possible to send print command directly from PLC, do anybody have idea or worked on this type of printer and OP15 HMI.
OP 15 has old software Comtext which is not available and neither it supports WinXP forget Windows 7.
Anybody worked on OP15 and IPP144-40 printer pls help.