BryanG
Member
I know that Siemens have their own supports for where the Network/Profitnet cable enters the S7-1200 range, but they don't support standard Ethernet cables, and they are a bit 'ouch' in price. In another thread I mentioned I had recently acquired a 3D printer, so I designed and printed my own. Pictures attached. I am a skinflint tight*rse so I used FreeCad for the design work, it can export to .dwg but I don't know the results. I have attached the FreeCad designs. I printed with a 0.4mm nozzle and 0.1mm layer height. There is space for cable ties to hold the cable even more firmly.
https://www.freecadweb.org/
https://www.freecadweb.org/