ricoghardforth
Member
Trying to configure some wago profinet IO using TIA portal.
I've not been able to use any of the wago ethernet utilities to find the thing over ethernet. I dont really understand the DIP switch settings for this module. Is there a default IP address. With no dip switchs on I thought the default would be 192.168.1.1 which I took from similar modules docs. I set my PC Ip address static on same range couldn't find any thing at this address and scanning using the ethernet setting program found nothing. Tried on office network with DHCP but a scan again found no devices with the Mac address of the module.
Also can't find any examples of using simens tia portal step 7 v11 to configure this io. I'm Just tying to configure the profinet rack with one 750-402 input and one 750-502 output module but its not letting me add the 502 module in a slot. Lots of setting I need explaining in a decent how to.
I've not been able to use any of the wago ethernet utilities to find the thing over ethernet. I dont really understand the DIP switch settings for this module. Is there a default IP address. With no dip switchs on I thought the default would be 192.168.1.1 which I took from similar modules docs. I set my PC Ip address static on same range couldn't find any thing at this address and scanning using the ethernet setting program found nothing. Tried on office network with DHCP but a scan again found no devices with the Mac address of the module.
Also can't find any examples of using simens tia portal step 7 v11 to configure this io. I'm Just tying to configure the profinet rack with one 750-402 input and one 750-502 output module but its not letting me add the 502 module in a slot. Lots of setting I need explaining in a decent how to.