Nauman
Member
Dear Friends ,
When i transfer the plc program from plc to computer , the program "uploaded" isnt complete or dont contains with its addresses.
Can anyone Help me . The Plc is of Siemens S7 200 and the software that i am using is V3.2 STEP 7 MicroWIN 32
Regards
Nauman
When i transfer the plc program from plc to computer , the program "uploaded" isnt complete or dont contains with its addresses.
Can anyone Help me . The Plc is of Siemens S7 200 and the software that i am using is V3.2 STEP 7 MicroWIN 32
Regards
Nauman