S7 timers in redundant mode

PLC_talk

Member
P
Join Date
Oct 2006
Location
p
Posts
50
Hello,
I have S7 redundant system. I am not sure whether S5timer will work in redundant mode. Siemens manual says it doesn't, & only IEC type permitted.
My ladder program is done & tested with S5timers, so it will be a real task to get this shifted to IEC type.
Any one knows a quick work around?
Thanks
 

Similar Topics

M
logix 500 timers vs studio 5000 timers
I recently did a program conversion from logix 500 to studio 5000 and when machine runs it depends on two ton instructions to keep the machine in...
Replies
9
Views
155
drbitboy
drbitboy
M
Studio 5000 TON timers in FOR loop in ST
Hi, I'm quite new to Rockwell PLC and currently trying to implement the following if Sw1 then for i:=1 to 20 by 1 do xEnable := 1...
Replies
9
Views
381
vagabondengineer83
V
R
FPWin Pro7 timers.
I'm writing some alterations to an FPWin program and need to see the running value of timers so I can set them correctly. It's my first time with...
Replies
0
Views
139
Ronnie Sullivan
R
F
Usage of Timers in Winproladder software for FATEK PLC
Hi everyone I am using Winproladder software for programming FATEK FBs PLCs and in programming, we often use Timers for activation of the...
Replies
4
Views
603
AB2005
A
afm
Retentive Timers with no RTO command
Hi all, I have what is likely not a complex issue, but I am working in Automation Studio and want an accumulating/retentive timer when a...
2
Replies
17
Views
1,930
afm
afm
Back
Top Bottom