S71200 Vb.net Comunication via wireless

lothen

Member
L
Join Date
Jul 2015
Location
İstanbul
Posts
1
Dear All;
I need a problem about TC/IP communication plc and Vb.net via wireles
I have managed to connect vb.net and plc s71200 via profinet cable and i can send data to plc and get data from plc.
I have cofigurated a Acces point plc side for wireless comminication .

PLC ip 10.1.1.250
AP 10.1.1.240
PC 10.1.1.100

Vb.net is connect to plc, but vb.net isn't gotten any data and isn't send any data.

What can i do about it ?

TRCV and TSEND Status 7001 .
 

Similar Topics

504bloke
Siebert Display to S71200 prefabs or profinet)
Rather than re-invent the wheel, I don't suppose someone has nay blocks for writing to the Siebert displays ? In particular the SX202 8 char 50mm...
Replies
1
Views
2,004
504bloke
504bloke
D
Profinet board communication with S71200 PLC
I am wondering if anyone can direct me to how to set up communication between a pcb board with ProFinet chip interface and S71200 PLC. I am not...
2
Replies
20
Views
6,122
jarus
J
J
SEW EI7C encoder to S71200 PLC
Hi Folks. Has anyone used an SEW EI7C encoder with an S71200 PLC? If yes, how is it done? I use this same encoder in EI76 mode with a...
Replies
0
Views
270
jmartin9
J
B
Shift register help, Siemens s71200
Hi everyone I am completely new to using shift registers and am a bit stuck, my shift register works as should, it is for an overhead conveyor...
2 3 4
Replies
55
Views
15,721
parky
P
H
S71200 TCP/IP communication with scanner card
Dear Experts, Warm Greetings ! By using TCON,TSEND,TRCV,TDISCON block,I am trying to make communication with my...
Replies
1
Views
1,498
hema
H
Back
Top Bottom