I have a large program with a high scan time I am looking to reduce the scan time so I can pick up a prox. on a screw shaft with a fast sink card in stead of a HSCE (Older SLC-L532) on a setup. I have read several posts on how the SCP
Instruction slows down the scan ,I have 11 running along with a with a lot of other function blocks doing my calc. One of my questions was weather the scan time on the processor running in emulate on my lap top was an actual to what it would be in the machine. Second was weather an STI would be work to keep the prox count refreshed. I will continue to look for opportunities to reduce the scan. i noticed bu stopping the scan of just my one ladder doing the math cuts my scan time in half. is the scan time , Current (x10ms) S:3(low byte)=12
really 120ms, Thanks any input is appreciated.
Instruction slows down the scan ,I have 11 running along with a with a lot of other function blocks doing my calc. One of my questions was weather the scan time on the processor running in emulate on my lap top was an actual to what it would be in the machine. Second was weather an STI would be work to keep the prox count refreshed. I will continue to look for opportunities to reduce the scan. i noticed bu stopping the scan of just my one ladder doing the math cuts my scan time in half. is the scan time , Current (x10ms) S:3(low byte)=12
really 120ms, Thanks any input is appreciated.