I have read some previous threads in regards to setting screen saver on PanleView plus 600 (I am using RSView ME and RSLogix 5000).
One of them has suggested the following:
write the PLC code to determine if anything is being done with the panelview. If say nothing has been done start a timer in the PLC and after set time use the PLC to change the screen to any screen you want.
To control the screen remotely via the plc you need to assign the 'Remote Display Number' item in Studio's Global Connections editor to a variable in the plc (data source).
I am wrting my PLC code in RSLogix 5000. But I do not know what sort of activity to look for in the panel view so that I can based on that input activity I can trigger the screen that I need.
Can some one give me some suggestions. Thanks.
One of them has suggested the following:
write the PLC code to determine if anything is being done with the panelview. If say nothing has been done start a timer in the PLC and after set time use the PLC to change the screen to any screen you want.
To control the screen remotely via the plc you need to assign the 'Remote Display Number' item in Studio's Global Connections editor to a variable in the plc (data source).
I am wrting my PLC code in RSLogix 5000. But I do not know what sort of activity to look for in the panel view so that I can based on that input activity I can trigger the screen that I need.
Can some one give me some suggestions. Thanks.