DaiCLy
Member
Hi,
I have a situation that I'm trying to resolve. I have a MT HR-83 moisture analyzer communicating via RS-232. I want to get info (moisture & weight) over to a Delta-V. But I am asking from a PLC Point-of-View (SLC..for scenario sake) how to send ASCII-based commands in ladder logic to the scale.
Just a little more background on what I am trying to achieve...reading those afore mentioned signals to DeltaV via RS-232 to Profibus (via MT Profibus converter), and ultimately going into the DeltaV backplane via the Profibus module.
Thanks,
Dai
[email protected]
I have a situation that I'm trying to resolve. I have a MT HR-83 moisture analyzer communicating via RS-232. I want to get info (moisture & weight) over to a Delta-V. But I am asking from a PLC Point-of-View (SLC..for scenario sake) how to send ASCII-based commands in ladder logic to the scale.
Just a little more background on what I am trying to achieve...reading those afore mentioned signals to DeltaV via RS-232 to Profibus (via MT Profibus converter), and ultimately going into the DeltaV backplane via the Profibus module.
Thanks,
Dai
[email protected]