Sergei Troizky
Member
I need a kind of a light curtain, measuring the width of passing object (that is, the number of interrupted beams).
Output signal format is not critical at this point.
The maximum object width will be ~16"/400mm, the resolution of 3/8"/10mm is sufficient.
The device does not have to be safety rated.
It must be a serially produced device with reasonable delivery time.
The cost matters
Any suggestions will be highly appreciated.
Output signal format is not critical at this point.
The maximum object width will be ~16"/400mm, the resolution of 3/8"/10mm is sufficient.
The device does not have to be safety rated.
It must be a serially produced device with reasonable delivery time.
The cost matters
Any suggestions will be highly appreciated.