Servo drive torque problem.

abbastukanov

Member
A
Join Date
Jan 2017
Location
konya
Posts
5
Hello everyone. I am using Toshiba VLASX-025P2-HXB drive, and 750W 3000 rpm motor with 1:15 gear for position control a rotating system. But motor rotates it hardly between 50-250 rpm speed even i can stop it by hand. If i increase speed it stops rotating.Torque is insufficient. load also is not too much.
I can not find any torque or pid parameter in drive menu. What do you suggest? Thanks for your answers in advance.
 

Similar Topics

I
Make an HMI convert from inches to PUUs (numeric input) before writing to servo drive
Hello all, I'm currently working on a servo motor linear positioning system (ball screw). I'm all set up regarding communication between my HMI...
Replies
1
Views
111
parky
P
R
Homing in a servo drive s120
How is the homing of a servo drive done
Replies
5
Views
142
Steve Bailey
Steve Bailey
S
Ethernet/IP servo drive
I am looking for some suggestions on good Ethernet/IP servo drives to communicate with an AB PLC. My customer has a non motion PLC but wants to...
Replies
8
Views
1,194
swimmy67
S
D
Upgrading 1394 Digital Servo Drive to Kinetix 5700
I am looking to upgrade some of our old Servo Drives to the newer kinetix 5700 style. currently we have 4 1394 axis that are all driven by 5kw...
Replies
1
Views
898
jholm90
J
L
Servo drive with MR-JE-10C + FX5U
Hello there! I try to to drive a HF-KN13 servo motor with a FX5U PLC through MR-JE-10C. I tested the connection between the servo amplifier and...
Replies
1
Views
684
goghie
G
Back
Top Bottom