I am not a drives guy so please take it easy on me. I have a customer that wants to switch from a servo to a VFD. This app is a small rotary fill station that is running a maximum of 100 RPM so speed is not a problem. The drum runs in constant speed mode so no stopping and starting. I do need positioning to +/- 2°. The repeatability is really what I need on this job. I am only using this as a programmable cam switch to open and close valve, solenoids, etc.
What family of PowerFlex do I start getting into encoder feedback on. It looks like a 70 put I can't see any supporting documents. Maybe I am just looking in the wrong place.
Anybody have some pointers.
What family of PowerFlex do I start getting into encoder feedback on. It looks like a 70 put I can't see any supporting documents. Maybe I am just looking in the wrong place.
Anybody have some pointers.