Hi Folks,
My customer had old bad barcode scanner (it was on devicenet using 1747-SDN). They want to replace them with Sick barcode scanner CLV630 with CDM+CMF400 (devicenet module).
The PLC is SLC505, when I use the pass-through via ethernet, I could see all of the nodes in RSLinx if the old barcode scanner was connected. But if I removed the old scanner and installed the new Sick scanner with the same devicenet node address settings, I could not see any nodes under the 1747-SDN, on 1747-SDN showed #21, error code:73: 21 is the devicenet node address. Which means I could not configure the new scanner on the scan list.
Please help and any suggestion would be appreciated.
Thanks,
My customer had old bad barcode scanner (it was on devicenet using 1747-SDN). They want to replace them with Sick barcode scanner CLV630 with CDM+CMF400 (devicenet module).
The PLC is SLC505, when I use the pass-through via ethernet, I could see all of the nodes in RSLinx if the old barcode scanner was connected. But if I removed the old scanner and installed the new Sick scanner with the same devicenet node address settings, I could not see any nodes under the 1747-SDN, on 1747-SDN showed #21, error code:73: 21 is the devicenet node address. Which means I could not configure the new scanner on the scan list.
Please help and any suggestion would be appreciated.
Thanks,