sick clv630-6121

[babybylar]

I have three Ethernet type barcode scanners different versions
i have the new style CDB620 and CMC600 parameter module
i cant get any of my outputs to turn on
the manual is vague.
which setting do i use on the parameter module.
i have a hardwired scanner that works perfect
i hope i dont have three bad scanners

 

[jdbrandt]

I have three Ethernet type barcode scanners different versions
i have the new style CDB620 and CMC600 parameter module
i cant get any of my outputs to turn on
the manual is vague.
which setting do i use on the parameter module.
i have a hardwired scanner that works perfect
i hope i dont have three bad scanners

.
Did you check the compatibility with your tool software? I recently had a SICK factory guy trying to configure new hardware, and he discovered that his software needed to be upgraded. Apparently, its not all that easy to know this.

 

[babybylar]

solution

Just talked to Sick
Cmc600 needs to be mode
The outputs should still work
Program it for stand alone no networking
I might have a bad breakout module

 

[babybylar]

mode F

Needs to be mode F