Siemens CP340 supply 5v pin 9

Big_Robo

Member
Join Date
Nov 2016
Location
England
Posts
81
Hi, been looking everywhere for this info but cant find it. Does anyone know if the CP340 RS232 card supplies 5v to Pin 9.

Thanks
 

Similar Topics

Hello, We have a Sartorius CP scale connected via RS232 to the PLC. All was working well but when the scale was replaced with a newer version...
Replies
8
Views
2,548
I am trying to only receive data from a device via serial communication. I can read the data through my com port on my computer so I know that it...
Replies
4
Views
1,702
All, one of our industrial printers we do represent is communicating with a Siemens CP340 RS232c PLC through a comms cable which is only using...
Replies
0
Views
1,340
Hi folks, I could really use some help - I am trying to connect CP340 with my PC by RS232 protocol. I need to send some characters to PC from...
Replies
0
Views
1,902
Hello, I have 3 balances connected on RS232 at very low speed (2400bps). All 3 make good communication. But, after a day or so, 1 or more...
Replies
5
Views
3,716
Back
Top Bottom