Hi all
This is my first post to this forum. I am busy (trying to)configure the hardware for a new plc. This will be a S7-300, with two CP342-5's; one connected to a number of simocode pro-v's and the other to ten link 20E's. Has anybody done this before? I've looked through a few Q&A's on various forums, but can't get it working. Currently I have only one Link 20E connected to one CP342-5. Both devices indicate bus fault. When using NCM diags, it indicates that my DP slave is non existent and deactivated.
Please help!!
This is my first post to this forum. I am busy (trying to)configure the hardware for a new plc. This will be a S7-300, with two CP342-5's; one connected to a number of simocode pro-v's and the other to ten link 20E's. Has anybody done this before? I've looked through a few Q&A's on various forums, but can't get it working. Currently I have only one Link 20E connected to one CP342-5. Both devices indicate bus fault. When using NCM diags, it indicates that my DP slave is non existent and deactivated.
Please help!!