Dear Experts,
I know its an old thread, but I am desperately needing your help regarding SIMOREG and DriveMonitor here.
Basically I have done everything I can based on my browsings on the internet.
I made the X300 to Serial cable, using the schematic provided by some guys that said we have to connect the 1-9-5 to the GND, etc.
I also checked the Drive parameter and DriveMonitor parameter.
But my drive is still not detected in drivemonitor.
My questions are:
1. Do I need to have the same firmware in DriveMonitor and the SIMOREG?
2. The drive is currently connected via SST-2 to a PLC. Can I still connect through SST-1?
3. How to set the PZD in DriveMonitor before we connect to the drive?
Thanks for your attentions. Please help us here. I don't know what to do anymore.