Hi, we have a Siemens ET 200S FC 6sl3244-0sa00-1AA0
that need to be replaced,
I wonder how I should do to go online on this unit.
I have tried this
https://support.industry.siemens.com/cs/document/22259986/simatic-et-200s-fc%3A-configuring-simatic-et-200s-fc-frequency-converter-in-step7-and-in-starter?dti=0&lc=en-WW
PG/PC interface is set to com1 baudrate 38400..something
and when i try a test in PG/PC interface I get answer on that baudrate
when scaning for nodes i get one on adress 0
add a new drive with firmeware 1.0xx in starter i choose adress 0,
but what slot should I select? slot 2 is default
i have tryied 0-2
but cant get online, even to a FC that is working.
need some advice in right direction
Thanks / Ason
that need to be replaced,
I wonder how I should do to go online on this unit.
I have tried this
https://support.industry.siemens.com/cs/document/22259986/simatic-et-200s-fc%3A-configuring-simatic-et-200s-fc-frequency-converter-in-step7-and-in-starter?dti=0&lc=en-WW
PG/PC interface is set to com1 baudrate 38400..something
and when i try a test in PG/PC interface I get answer on that baudrate
when scaning for nodes i get one on adress 0
add a new drive with firmeware 1.0xx in starter i choose adress 0,
but what slot should I select? slot 2 is default
i have tryied 0-2
but cant get online, even to a FC that is working.
need some advice in right direction
Thanks / Ason
Last edited: