Siemens Logo! or Idec Smart relay connector

[Wanderer]

Hallo and Happy new year to all


I am looking for the connector in the attached picture but I can't find it anywhere.It is for the serial connection of the logo! or the smart relay with a pc.Can somebody help me?

Thank you

 

[Coolerman]

Hallo and Happy new year to all


I am looking for the connector in the attached picture but I can't find it anywhere.It is for the serial connection of the logo! or the smart relay with a pc.Can somebody help me?

Thank you

That is a custom connector and will be very hard to find.

That is the exact same cable as the Idec Smart relay cable. You can order the cable for about $70 from Allied Electronics Part # 814-1125. Sorry can't be of more help..

 

[agarb]

Sorry the picture is blurry. Are the pins on 0.10" centers?

 

[Wanderer]

Answer

The distance : Pin from pin is 1 mm

The dimension of the rectangular connector is 5.5mm x 5.5mm

The photos are in real dimensions.

Thank you for your answers.I am still searching without any luck yet.

 

[whish1]

would you be willing to give me some advice on programming a logo .

 

[CaseyK]

would you be willing to give me some advice on programming a logo .

I've lost the links, but there were two USA distributors that had extensive "How-To" sections on their websites for programming Moeller "EASY" relays. Moeller makes and re-lables Logo's, AB's, IDEC's, etc.

Try googling "EASY" programming.

 

[CaseyK]

controlparts.com has the programming info, along with other useful info on the "easy" type smart relays.

they also have the cable for $60.00

surely, someone must have it on eBay by now for $20.