Siemens Micro/Win Saving Status before power failure

mikel73

Member
M
Join Date
May 2012
Location
Florida
Posts
4
Can the status of the unit be saved in the L memory so after the unit experiences a power failure, the unit starts up in the last saved status?
 

Similar Topics

A
PID loop implementation in siemens micro/win.
Hi, I'm new to this forum and have been programming plc's for about 2 years now. I have done programming and mods on different small systems and...
Replies
3
Views
3,342
BryanG
B
AutomationTechBrian
Siemens Step7 Micro/WIN installation issues
Just when you think your problem is solved..... new problem! My Siemens rep came through with with the Step7 Micro/WIN software I needed for a...
Replies
4
Views
6,932
geniusintraining
geniusintraining
AutomationTechBrian
Siemens Step7 Micro/WIN software for programming an S7-200 PLC
I have an opportunity to quote an HMI project for one of my customers. It's a small project, and the customer is not the type with deep pockets...
Replies
3
Views
24,877
AutomationTechBrian
AutomationTechBrian
M
Siemens Micro/Win Retentive Ranges
Am I correct to think the Offset is the start and the Number of Elements the end? MB Offset = 14, Number of Elements = 18 Means, MB 14 to MB...
Replies
1
Views
1,677
BryanG
B
matthew1
Siemens Step 7 micro/win Questions
Hello all! I just started to "play" around with Siemens. I have installed SIMATIC Step 7 Micro/win v4.0+sp4 (v4.04) on a Vista machine. S7-200...
2
Replies
17
Views
9,577
geniusintraining
geniusintraining
Back
Top Bottom