Siemens Micromaster 430 Drive
- Thread starter bluegoose
- Start date
DesertDog
Member
I use a MicrMaster 440 to control a variable speed & pressure hydraulic circuit, what do you want to know?
I used the Profibus option card shown here.
I used the Profibus option card shown here.
Bitmore
Member
I have a user defined data type and devicenet eds file for that drive. I use it on a ControlLogix platform with PID to control a hot water pressure loop. Is that the type of information you need? Your first post was a little sketchey.
Bitmore
Bitmore
Similar Topics
It is first time we are working with CANOpen.
There is a task to control Siemens Micromaster430 from Modicon M340. We've got EDS from Siemens...
Hi
Can i plug an AOP into a siemens 430 MM invertor ? The AOP is listed for the 440 only, the 430 uses the BOP2 ?
Reason i ask is i just had a...
Hello Everybody,
Recently we changed the gearbox which has different ratio than the original one on a motor which is controlled by Micromaster...
Hello Experts
I have to to make a backup of Siemens micromaster mm 440 with RS 485 to terminal 29&30. I use starter or drive monitor
Do i need...
My tutor asked me for this small project: using S7-200 control MM440 with PROFIBUS. Because S7-200 with PROFIBUS module EM277 can only be PROFIBUS...