thomas1000
Member
Hi,
I have a scenario where a customer has one spare OP277 to backup two applications, both applications using OP277's.
Is it possible to download each project file onto a separate SD Flash card and boot the desired application from the SD Card on to the OP277.
It does not have to a permanent solution but something to get get the customer out of trouble until I have an opportunity to attend site to change the screen.
Will this work?
If I change the settings in the Transfer Settings of the Control Panel under the directories tab from:
Project File
\Flash\Simatic\
Project Backup
\Storage Card MMC\Simatic\
Autostart application:
Path:
\Flash\Simatic\HmiRTm.exe
to
Project File
\Storage Card MMC\Simatic\
Project Backup
\Storage Card MMC\Simatic\
Autostart application:
Path:
\Storage Card MMC\Simatic\HmiRTm.exe
Would like to know if someone else has tried this.
Thanks
I have a scenario where a customer has one spare OP277 to backup two applications, both applications using OP277's.
Is it possible to download each project file onto a separate SD Flash card and boot the desired application from the SD Card on to the OP277.
It does not have to a permanent solution but something to get get the customer out of trouble until I have an opportunity to attend site to change the screen.
Will this work?
If I change the settings in the Transfer Settings of the Control Panel under the directories tab from:
Project File
\Flash\Simatic\
Project Backup
\Storage Card MMC\Simatic\
Autostart application:
Path:
\Flash\Simatic\HmiRTm.exe
to
Project File
\Storage Card MMC\Simatic\
Project Backup
\Storage Card MMC\Simatic\
Autostart application:
Path:
\Storage Card MMC\Simatic\HmiRTm.exe
Would like to know if someone else has tried this.
Thanks