SIEMENS RS485 repeater & Profibus Terminator

Join Date
Jun 2002
Location
Lahore, Pakistan
Posts
15
Hi,
Any one please help me. At this time I at a site for commissioning. Here I got
SIEMENS RS485 repeter ( 6ES7 972-0AA010OXA0) AND
SIEMENS PROFIBUS terminator ( 6ES7 972-0DA00-0AA0)
There is no manual with them and I was unable to find these manuals on internet. I need there connections diagram. Please help me.
Best Regards
Shahid Iftikhar
 
Hello shahid_iftikhar;


The manual you are looking for is vcalled Profn2_e.pdf, and is available on the Siemens support website under ID:1971286.

In the meantime, here are 2 diagrams from that manual, showing the desighn of the RS485 repeater and the Profibus terminator.
Hope this helps,
Daniel Chartier

pb_term.jpg
 

Similar Topics

Hello! I would like to know if I am rigth about repeater. I have been reading the manual, but I have some doubts. I put this picture. Is correct...
Replies
4
Views
3,951
Hi all, I've hit a bit of a brick wall and need some help. I'm currently trying to get a Siemens S7-1200 PLC to talk to an Eaton DE1 Drive I'm...
Replies
8
Views
3,686
HI All, does anyone know if you have to change a cp 341 rs232 and use a cp341 rs485, what changes have to be made to get it to...
Replies
0
Views
1,344
I currently have a RS485 full-duplex bus system with slaves running at 230k4 baud. I'm looking to connect my Siemens S7-315 2PN/DP with this bus...
Replies
9
Views
3,126
I have a siemens tp170a hmi and tried just for fun, to use modicon modbus driver settings and communicate with a regin roomcontroler. I use the...
Replies
2
Views
2,109
Back
Top Bottom