Hey i need to make small changes in the PLC program on a sinumerik 3 system,
The PLC 6ES5921-3WB14 have 2 eprom
slot 1 6FX1817-0AX15
slot 2 6FX1123-6AB00
First i was think that slot 1 handles the PLC program and slot 2 stuff for the NC like machine parameter, user parameter and tool data etc.
but now im not sure,
i was read out the eprom in slot 1 to the PG and there only was some FB, DB, and OB and non of PB
and when i go online i have alot more program blocks,
so now i wonder if it´s safe to take out the eprom from slot 2, thinking that a part of program is there (or some where else?)
i wanna be really sure that there is the PLC program in slot 2 before i take that out, don't wanna make cold restart on a old machine like this by a mistake (bean there done that before )
The PLC 6ES5921-3WB14 have 2 eprom
slot 1 6FX1817-0AX15
slot 2 6FX1123-6AB00
First i was think that slot 1 handles the PLC program and slot 2 stuff for the NC like machine parameter, user parameter and tool data etc.
but now im not sure,
i was read out the eprom in slot 1 to the PG and there only was some FB, DB, and OB and non of PB
and when i go online i have alot more program blocks,
so now i wonder if it´s safe to take out the eprom from slot 2, thinking that a part of program is there (or some where else?)
i wanna be really sure that there is the PLC program in slot 2 before i take that out, don't wanna make cold restart on a old machine like this by a mistake (bean there done that before )