Hello,
I have Step 7 v 5.5 and WinCC flexible 2008 on my laptop, and we have a customer (MP377) on the internet with a fixed IP address.
I can upload the customer S7 program (Menu->PLC->Upload station to PG, at here I enter the customer internet IP).
However, when I download from simatic manager (Menu -> PLC->Download), it doesn't ask me for the remote IP, and trys to connect somewhere for a while, then pops up an error: Online: connection could not be established. The connection partner is not responding.
I can also download my HMI (WinCC Flexible) to the remote because when I click on download there is a prompt to enter IP address.
Can any one tell me where to enter the ip address before I perform the download function?
Best regards
I have Step 7 v 5.5 and WinCC flexible 2008 on my laptop, and we have a customer (MP377) on the internet with a fixed IP address.
I can upload the customer S7 program (Menu->PLC->Upload station to PG, at here I enter the customer internet IP).
However, when I download from simatic manager (Menu -> PLC->Download), it doesn't ask me for the remote IP, and trys to connect somewhere for a while, then pops up an error: Online: connection could not be established. The connection partner is not responding.
I can also download my HMI (WinCC Flexible) to the remote because when I click on download there is a prompt to enter IP address.
Can any one tell me where to enter the ip address before I perform the download function?
Best regards