jdf
Member
Hi All
What I am trying to is reinstate an unused IFIX (v 2.5) SCADA master. I am having problems getting comm’s between SL4 power tool and the PLC CP card. If I changed the MAC address in SL4 and point to another PLC CP card I can get "comm's". I am now wondering if the CP card I am tying used is not singed to be used with SL4? The Siemens part number is 6GK7 343 1EX21 0XE0 (one of the new one's which can act as an PROFINET controller as well). If it is the version of CP card that is the problem can I install SI7 power tool on IFIX 2.5?
Thank you in advance
Jon
What I am trying to is reinstate an unused IFIX (v 2.5) SCADA master. I am having problems getting comm’s between SL4 power tool and the PLC CP card. If I changed the MAC address in SL4 and point to another PLC CP card I can get "comm's". I am now wondering if the CP card I am tying used is not singed to be used with SL4? The Siemens part number is 6GK7 343 1EX21 0XE0 (one of the new one's which can act as an PROFINET controller as well). If it is the version of CP card that is the problem can I install SI7 power tool on IFIX 2.5?
Thank you in advance
Jon