Hello guys,
I was solving simple AC circuit given in this figure. After I solved it manually, I tried to check and confirm results with Electronics Workbench Multisim 8. In the attached picture you can actually what ampermeters will show, but the problem is that I got exactly opposite results.
Current RMS in upper rung was 11.4 A, while current in bottom rung was 9.56 A. At first I thought I made mistake when solving, but tried several times and with different methods always getting same results. Now, I think problem is with this software. If you can solve this manually or you have some kind of simulation software, please do it so we can compare results...
P.S. Merry Christmas to everyone who celebrate.
I was solving simple AC circuit given in this figure. After I solved it manually, I tried to check and confirm results with Electronics Workbench Multisim 8. In the attached picture you can actually what ampermeters will show, but the problem is that I got exactly opposite results.
Current RMS in upper rung was 11.4 A, while current in bottom rung was 9.56 A. At first I thought I made mistake when solving, but tried several times and with different methods always getting same results. Now, I think problem is with this software. If you can solve this manually or you have some kind of simulation software, please do it so we can compare results...
P.S. Merry Christmas to everyone who celebrate.
Last edited: