Found a couple of old unused Micro 810s with lcd displays in the miscellaneous section. Don't ever use ccw or indeed any Allen Bradley, but decided to have a play.
I downloaded latest software and updated controller firmware. Decided to pick a "lcd read" instruction, put a digital input to it and a digital output and expected to see my output "ON" when I pressed the "Up" key, but nothing happens at all.
I have added the lcd screen in the ccw options and I have checked on the controller itself, that "p button" is enabled.
As I said, I don't use ccw, so probably doing something stupid.
I downloaded latest software and updated controller firmware. Decided to pick a "lcd read" instruction, put a digital input to it and a digital output and expected to see my output "ON" when I pressed the "Up" key, but nothing happens at all.
I have added the lcd screen in the ccw options and I have checked on the controller itself, that "p button" is enabled.
As I said, I don't use ccw, so probably doing something stupid.