SLC_Integrator
Member
I set my class a problem this week in the PLC class I teach and wondered if some of you genius types can provide your input.
How to make an output turn on when you press a pushbutton input, it stays on when you release but then when you press the same button again it goes off. Sort of like a toggle switch on an HMI.
This has to be done using the least possible rungs!
Answers on a postcard please.
I found its not quite as simple as I thought
I did get it to work though
How to make an output turn on when you press a pushbutton input, it stays on when you release but then when you press the same button again it goes off. Sort of like a toggle switch on an HMI.
This has to be done using the least possible rungs!
Answers on a postcard please.
I found its not quite as simple as I thought
I did get it to work though